Hot Water Cylinder Repairs & Replacement in Wellington

No Hot Water?

Burst Pipe?

Blocked Toilet?

Get your hot water flowing fast

No hot water, a leaking cylinder or water that won’t stay hot? Our plumbers and gasfitters repair and replace hot water systems across Wellington, Porirua and the Hutt, often on the same day.

We carry common parts in our vans, tell you the cost before we start, and back every job with our workmanship guarantee.

Leaking cylinder Porirua job

Signs your hot water cylinder needs attention

  • No hot water at all. Often a failed element or thermostat on an electric cylinder, or an ignition fault on a gas unit.
  • Water doesn’t stay hot for long. Usually a heating fault, but on older cylinders it can mean sediment build-up.
  • Water dripping from the overflow pipe outside. A small amount can be normal, but a constant flow usually points to a faulty relief or pressure valve.
  • Water pooling around the cylinder. If the cylinder itself is leaking, it generally can’t be repaired and needs replacing.
  • Rusty or discoloured hot water. A sign of internal corrosion.
  • Rumbling, banging or hissing. Often sediment or a valve problem.

 

If your cylinder is actively leaking, turn off the cold water valve at the top of the cylinder (or your toby), switch off the power at the switchboard or the gas at the unit, and call us.

Repair or replace?

We’ll always tell you which makes more sense, and we won’t push a replacement if a repair will do the job.

  • Repair is usually the right call when the problem is an element, thermostat, valve or ignition fault and the cylinder itself is in good condition. Most of these repairs are done in one visit.
  • Replacement is usually the better option when the cylinder is leaking, badly corroded, or [over 15 years old] and needing repeated repairs. It’s also worth considering if you’re running out of hot water as your household has grown, or you want to move from low pressure to mains pressure.
Two kids enjoying the new hot water cylinder
Gas vs. electric hot water systems, Tap with hot water and steam

Hot water systems we install

  • Electric hot water cylinders. Mains pressure and low pressure cylinders in a range of sizes, sized to suit your household.
  • Gas continuous flow. Endless hot water that’s only heated when you need it. We’re experienced installers of [Rinnai Infinity systems](link to Rinnai page).
  • Heat pump hot water. Lower running costs than a standard electric cylinder, suited to homes looking to cut their power bills.
  • Switching from electric to gas, or from low to mains pressure? We’ll talk you through the costs, any extra work involved, and whether it’s worth it for your home.

How it works

  1. Call or book online. Tell us what’s happening and we’ll give you a time, [often the same day].
  2. We diagnose the problem. Our plumber checks the system and explains what’s wrong in plain English.
  3. You get a price before we start. For repairs, we fix it on the spot if you’re happy to go ahead. For replacements, we give you a written quote.
  4. We complete the work. Installed to code, tested, with your old cylinder taken away.
  5. You get the paperwork. Including any certification required for gas or electrical work.

Why Paramount

  • Local. Based in Ngauranga, close to Wellington City, Porirua and the Hutt.
  • Upfront pricing. You know the cost before any work begins.
  • Plumbers and gasfitters under one roof. No need to book two trades for a gas hot water job.
  • Guaranteed work. We guarantee your peace of mind with our 24-month extended maintenance promise. 
     
Emergency Plumbers Wellington

Hot Water Frequently Asked Questions

Why have I suddenly got no hot water?
On an electric cylinder, check the switchboard first in case the circuit has tripped. If it hasn’t, it’s usually the element or thermostat. On a gas system, check the gas is on and look for an error code on the controller. If none of that helps, give us a call.

How long does a hot water cylinder last?
Most last 10 to 20 years, depending on water quality, pressure and maintenance. If yours is past that and showing problems, replacement is usually more cost-effective than ongoing repairs.

How long does a replacement take?
A like-for-like electric cylinder replacement usually takes half a day. Changing system type, location or pressure takes longer, and we’ll tell you upfront.

Is gas or electric hot water cheaper to run?
It depends on your household size, how much hot water you use, and your energy prices. We’ll give you an honest comparison for your home.

Do you replace cylinders on weekends?
Yes, for emergencies. After-hours rates apply.

Will I need a building consent?
Replacing a cylinder like-for-like usually doesn’t need one. Changing the type of system or moving it can, and we’ll let you know before any work starts.